The Flexunits system was developed to fulfil individual data as desired, and we are able to meet even the most specific individual requirements – mechanical as well as electrical.

Fs, Vas and Qts can all be modified and the coil former can be made of either aluminium or Kapton. In special cases the cone material and suspensions can also be changed.

Gap height and coil length as well as diameter can be selected individually and the magnet size can be altered to fit the needed strength required.

For the less experienced customer, we have made a line of multipurpose drivers, represented by each size, from 4” mid-woofers through 15” subwoofers, enabling you to approach a project, the more conventional way. It is also possible to use one of the standard drivers as a raw model, and getting parameters changed in the direction you wish.

To specify your requirements please use our specification form.
Remember that we can only work within the physical laws of nature.

Features - FlexUnits

• Die cast aluminium chassis.
• Gold plated input connectors.
• Ventilation under the rear suspension.
• Voice coil gap ventilation.
• Maximum rear ventilation for minimum compression.
• Compressed lightweight aluminium voice coil, wound in hexagonal technique.

Driver Codes

FlexUnits - The Original Idea  

The FlexUnit system was developed to fulfil individual needs as desired. This service is available.

To specify your driver fill out our specification form.

SD = Symmetric drive
  K = Kapton®
KA = Kapton® Aluminium combination
  P = Sandwich Cone
  M = Midrange surround

Copyright © 2013 AudioTechnology