ORDERFORM - FLEX UNITS
Acoustic- and mechanical parameter specifikation form
This form is intended for you to fill out with your desired parameters.
The choise in sizes are illustrated below and you write the desired size in the corresponding box, thus providing us with a code that together with Qts, Zmin, fs and Vas, and possible design requirements, enables us to manufacture your speaker units compleatly according to your wishes.
Additional information is off course welcome eg. cabinetsize, use, system and desired fs.
Should any questions arise, feel free to phone or fax us.

Mechanical specifications
Emmisive cone diameter Magnet size Coil diameter Coil height Gap height
4" Ø 108 5" Ø 132
6" Ø 147 8" Ø 165
10" Ø 207 12" Ø 256
15" Ø 310

Ø

ø H
A 170 77 20
B 170 77 24
C 200 77/120 20
D 200 77/102 24
E 220 77/102 22
F 220 77/102 25
G 110 52 17
H 120 52 20
I 134 52 20
52, 77 or 102
5 10 15 20
25 30 35 40
5 to 20 mm, higher
at special request

mm

  

Acoustic specification
   
Design specifications
 
Qts:
Zmin:
fs:
Vas:

Other acoustic requirements:

If you have other wishes or want other shapes than the ones shown below please specify.
   

    
Minimum diameters
4" = 150 mm 5" = 175 mm 6" = 210 mm
8" = 245 mm 10" = 285 mm 12" = 330 mm
15" = 410 mm

Fill out the specification form, print and fax it to: +45 86 57 15 23

 

Copyright © 2020 AudioTechnology